The Powerex FirstCall™ medical gas alarm systems monitor the status of medical gases in Category 1 healthcare facilities. The alarm systems are ETL listed to UL 1069 and comply with the latest edition of NFPA 99. All alarm systems provide audible and visible indications of NFPA 99 medical gas alarm conditions.
- 10” high-resolution touchscreen HMI with 7” VE option available
- Ethernet connectivity using BACnet over IP protocol to building management system – standard
- Customizable emergency instructions in the event of an alarm
- Area alarm up to 8 gases
- Master alarm 23, 39, and 55 input signals
- Combination alarm up to 6 gases, 23, 39, or 55 input signals
- Designed and manufactured in the USA
- 5 year warranty on parts, 2 year warranty on labor
- Powerex UL ETL Listing (UL 1069)
- Powerex CSA ETL Listing (CAN/CSA C22.2 No. 205)
- Built by Powerex in Harrison, OH
- 5 year warranty on parts, 2 year warranty on labor
- 10” high-resolution touchscreen HMI with 7” VE option available
- Area alarm up to 8 gases
- 4-20mA signal transducers, DISS demand-check fittings, and gas risers included with Area Alarm
- Transducers are able to be remotely installed up to 5,000 ft away
- Master alarm 23, 39, and 55 input signals
- Combination alarm up to 6 gases, 23, 39, or 55 input signals
- Ethernet connectivity using BACnet over IP protocol to building management system – standard
- Alarm signal status can also be viewed on a standard computer connected to the facility’s local network via Ethernet
- Customizable emergency instructions in the event of an alarm
- Easy to use interface for setup and changing settings
- Pre-programmed NFPA 99 gas labels and colors
- Event history log accessible at the screen
- Alarm test feature – able to use quickly without logging in
- Area alarm automatically sets NFPA 99 +/-20% limits based on current pressure
- Master alarm pre-programmed NFPA 99 source alarm signals – also customizable
- Master alarm signals organized under main source badge – click through for individual alarm information
- Push-in terminal blocks to easily connect transducer and source equipment alarm signals
- Factory set for normally closed signals, able to change to normally open
- Transducers are gas-specific, and cross-connecting a transducer with an assigned gas input will generate an alarm per 2018 NFPA 99
- Hinged frame for easy assembly and maintenance
- Option for digital outputs – contact factory
Powerex FirstCall™ medical gas alarm retrofit kits are designed to upgrade or retrofit existing panels by replacing all necessary major components and reutilizing the existing back box. Powerex FirstCall™ medical gas alarm retrofit is compatible with the following alarm panels:
- Amico Alert-2 (3 through 7 gang back box only)
- Amico Compact Alert-2 (3 through 7 gang back box only)
- Amico Alert-3
- Amico Alert-4
- Beacon Medaes MEGA 2
- Beacon Medaes MEGA 3
- Beacon Medaes TotalAlert Infinity
- Ohio/Ohmeda/Medaes “Black Front”*
- Hill-Rom/Beacon “Tan Front”* **
- Chemetron Series 74 Impact Alarm System
- Chemetron Digi I
- Chemetron Digi II
- Tri-Tech Medical DU/DC***
- Tri-Tech Medical Med Touch***
*The Ohio/Ohmeda/Medaes Multi Module Line Pressure Alarm and the Hill-Rom/Beacon Area Line Pressure Alarm both require Hansen fittings for the transducers, so this must be indicated at the end of the part number with “-BTF.”
**The Hill-Rom/Beacon “Tan Front” 5 and 6 gas Area Alarms require a unique component layout, so this must be indicated at the end of the part number with “-TF56.”
***The Tri-Tech Medical DU/DC Series Combo and Master Alarms and Med Touch series Master Alarms greater than 24 signals require a unique component layout, so this must be indicated at the end of the part number with “-TTM”
POWEREX: The Leader in Pure Air Technology
Copyright 2021 POWEREX | All Rights Reserved. | Privacy Policy | Sitemap | Blog | Website Designed by 